Failed to clear disk attributes

Receive “ faicaused clear disk attributes” error once clearing disk readonly cluster on exterior difficult drive and USB drive? Discover the reasons and also fixes in Windows 10/8/7.

You watching: Failed to clear disk attributes



/ Last Updated February 27, 2019

Diskcomponent failed to clear disk attributes

“When keep documents to my external tough drive, I acquire an error message claims it iswrite-safeguarded and also I cannot compose any kind of information to the disk. Then I Google the messageand also was told to resolve the difficulty via Here are the command also lines: listdisk > pick disk 2 > features disk clear readjust. And then I gain theprompting says: Diskcomponent fairesulted in clear disk qualities. Well, guess I’ve gotan additional problem. Any pointer will be appreciated.”


Did you come throughout the same problem? Search on the Net, you deserve to find classiccomputers.infofairesulted in clear disk characteristics error additionally happens on USB flash drive, SD card, Pendrive, also internal hard drive in Windows 7, 8, 10, XP and also Windows Server2008/2012.

Disk features describe disk qualities such as disk complimentary (MB), disk name, diskprovided (MB), file mechanism status, file device kind, inodes free and also inodes provided.Essentially, the disk features readonly refers to write-defended problem, i.e. youcannot create and also modify any kind of data on that volume or disk. Due to some kinds ofreasons, Diskcomponent cannot rerelocate the check out just cluster efficiently. What will bedepicted in this article is why you gain the failed error message and also exactly how to removethe review only disk features in other techniques.

Why Diskcomponent failed to clear disk check out just cluster?

Every trouble has actually its reasons. If you uncover faicaused remove the review onlyattributes, it could be explained by one of complying with reasons.

There is physical write-protected tab on USB drive, SD card reader andexterior hard drive enclosure.

You did not run Diskcomponent as administrator.

The disk you schosen probably has bad sectors, be set concealed ornodefaultdriveletter.

The disk you selected is a new USB drive via RAW format. The RAW format mayoutcome from corrupted file mechanism. And does not work-related for that type offormat properly.

Those are main feasible factors for “ failed to clear disk attributesreadonly cluster”. Without a doubt, there are other determinants affecting that. But whatcounts next is to number out how to fix the problem easily.

How to deal with Diskcomponent failed to clear disk characteristics in Windows 10/8/7?

To deal with the error, you need various services under different scenarios. In thefirst location, make sure tright here is no physical write-security tab, and if tright here is,switch it to the unlock side. Connect the exterior difficult drive or USB flash drive toyour PC and try adhering to approaches.

Modify WriteProtected key using Registry Editor

When the stops working you on clearing disk qualities, revolve to one more energy.

1. Press Windows essential and also R key to open Run box. Type regedit andclick OK.

2. Navigate to:


Tips: If you cannot discover the “StorageDevicePolicies”, you can createone manually. Right click the “Storage” folder and select “new” > “DWORD(32-bit)Value”. Then a brand-new crucial will certainly be produced and is waiting for you to name it, type“writeprotect”.

3. Right click the WriteProtected key and also select Modify. In thepop-up window, change value data from 1 to 0 (positive to negative).


Write information to the outside drive. Or, run qualities disk clear readjust again andthen create data to that disk. However before, if the factor of failed is not writeprotected key, you’ll need other options.

Clear attributes on brand-new RAW USB drive

In some instances, a brand-new USB drive with RAW format can likewise get readonly error and also theerror cannot be rerelocated by Diskcomponent. As covered, it may be impacted by inappropriatepartition format. In that case, you should reformat the drive through another filedevice that deserve to be recognized by Windows. Follow these procedures to settle classiccomputers.infofailed to clear disk attributes on USB drive.

1. Open Run as instructed. Type and click OK. Run asadministrator.

See more: Windows 10 Not Asking For Password, Laptop Stopped Asking For Password At Start Up

2. Type following regulates in turn to format RAW drive.

list volume

pick volume n (where n is the RAW drive)

format fs=fat32 quick (you have the right to rearea “fat32” through “ntfs” or “exfat” aswell)



Tips: you deserve to type attributes disk to check out thestanding of the selected disk.

It will certainly be formatted and also be known by Windows. Now, you have the right to try the diskcharacteristics clear command also, or create information to the drive directly if you deserve to. However,if you cannot format RAW drive in, please describe format RAW filesystem pen drive.

Check hard drive for errors

As discussed prior to, poor sectors, partition set hidden and also nodefaultdriveletter onthe disk are also affecting determinants. Because of this, you deserve to examine poor sectors to excludethe opportunity.

1. Open Run box and form cmd. Run as administrator.

2. Type chkdsk F: /f (wright here F: is the partition you will check) andhit Go into. It will certainly uncover bad sectors on the disk and also attempt to solve them.


In some cases, the chkdsk command may not occupational, for example, it stuck duringrepairing. If that is the instance, please describe CHKDSK Windows 10stuck for remedies.

Alternatively, to stop the stuck error, you deserve to do disk checking through the help ofvarious other tools. AOMEI Partition AssistantStandard is totally free partition manager that is able to examine both hard disk andsingle partition via various arrangements. Also, you can fix the concern causedby surprise partition and also nodefaultdriveletter. Downpack this freeware to getDiskcomponent failed to clear disk characteristics solved. Install and run AOMEI PartitionAssistant on your computer.

Check Partition: appropriate click the partition you desire to checkand also pick Check Partition. Follow the wizard to finish.


Check Disk: to inspect the status of the whole disk, rightclick the disk and pick Surchallenge Test. Follow the wizard tofinish.


Unhide Partition: appropriate click the concealed partition andpick Advanced, and then Unhide Partition.Follow the wizard to complete.


Asauthorize Drive Letter: right click the partition you desire toand select Advanced, and then Change DriveLetter. Select the brand-new drive letter from the drop-down menu in thepop-up window, and click OK.


Alternatively, you can assign drive letter through list volume > selectvolume n (wbelow n is the variety of the partition you desire to asauthorize to) > assignletter=F (you have the right to rearea R through various other drive letters) > exit.


All operations will come to result till you click on Applyon the tool bar and also then Proceed in the popping up window.


When you acquire fairesulted in clear disk attributes” error in Windows 10, 8, 7, itis a wise relocate to achieve the goal with various other approaches. To remove the Readonlycluster, you can edit Writeprotected key in Regisattempt Editor, completely formatpartition, or check and deal with errors for that disk.

See more: There Seems To Be An Issue Connecting To Your Gopro, Difficulty Connecting To App

The progressed version, AOMEI Partition Assistant Professional supports command lineoperations, alfind complimentary room from one partition to the various other straight, convertsystem disk from MBR to GPT without information loss, and also so on. You may desire to upgrade to the Professional to have actually a try.